Epson Cinema 500 제품 데이터시트

Epson PowerLite Cinema 500 Projector

10 - Epson PowerLite Cinema 500 Projector

2/04

Cinema Color Editor is a program that lets you use your 
computer to operate the projector in place of the remote 
control, and to make fine custom color adjustments.

Note: See the User’s Guide for instructions on installing Cinema 
Color Editor and connecting the projector to your computer.

You can use Cinema Color Editor to change the image source, 
adjust the aspect ratio, or turn the power off—just as you would 
from the remote control.

1. Open Cinema Color Editor, then click the 

Remote Control

 

tab.

2. Click one of the buttons for the options shown above.

You can use Cinema Color Editor in place of the projector’s 
menu system to adjust the image.

1. Click the 

Picture Quality

 tab.

2. Click one of the buttons shown above to access these 

settings:

Note: See the User’s Guide for details on using these settings.

Turn off the power

Change the image source 
(see page 5)

Adjust the aspect ratio 
(see page 6)

Select Remote Control

Input Adjustment
Brightness
Color Intensity
Tint
Sharpness
Color Temp. and Flesh Tone
Tracking
Sync

Color Mode
Color Adjustment (see next section)

EPSON Super White
Progressive
Motion Detection
Output Scaling
Setup Level
Noise Reduction
DVI-Video Level
Auto Setup

First, select

Picture Quality

Then click one of

these buttons to

access additional

settings