Epson Cinema 500 제품 데이터시트

Epson PowerLite Cinema 500 Projector

2/04

Epson PowerLite Cinema 500 Projector - 5

Basic Image Adjustments

Once the projector is turned on, use these functions to adjust
the image.

Selecting the Image Source

If you don’t see the image you want, press the

Source

button

on the remote control that corresponds to the port to which
your video equipment is connected. For example:

Focusing and Zooming the Image

To adjust the sharpness or size of the image:

Note: Before starting, you may want to display a test pattern to
facilitate adjustment. Press the Pattern button on the remote
control, then select Cross-hatching.

1. Press the

Focus

Zoom

button on the projector or remote

control.

You see this screen:

2. Use the

arrow buttons to adjust the image.

Note: If you use the remote control, you can stand close to the
screen while focusing the image. This lets you adjust the picture
more precisely.

3. Press

ESC

when done.

Inverting and Mirroring the Image

If the image is upside-down or backwards, use the Projection
function to adjust it:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu,

then open the

Screen

menu and select

Projection

3. Choose from these options:

❏

Front

if the projector is located in front of the screen (for

example, on a table).

❏

Front/Ceiling

if the projector is located in front of the

screen and mounted overhead.

❏

Rear

if the projector is located behind the screen.

❏

Rear/Ceiling

if the projector is located behind the screen

and mounted overhead.

Selecting the Input Signal

If you’re using the projector’s Input A or B port, select the
correct setting for the type of video equipment you’ve
connected to it:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu,

then open the

Input Signal

menu and select

Input A

Input B

(depending on the port to which you’ve connected

your equipment).

3. Choose from these options:

❏

YCbCr

for a video player that outputs an NTSC signal.

❏

YPbPr

for a video player that outputs an HDTV signal.

❏

RGB-Video

if your video player outputs an RGB video

signal.

❏

RGB

if your image is coming from a computer.

Performing Keystone Correction

If the projected image looks like

, use the Keystone

function to correct its shape.

Note: If the image is shaped like

, the projector has been

placed off to the side of the screen and angled toward it. Face the
projector straight ahead (instead of at the center of the screen), then
use the horizontal lens shift knob to center the image.

To perform keystone correction:

1. Press the

button on the remote control.

2. Use the menu navigation buttons to open the

Setting

menu,

then open the

Screen

menu and select

Keystone

3. Use the

arrow buttons to adjust the shape of the image.

4. Press the

button when done.

To select the image source
connected to the Video port . . .

. . . press the Video
button