Epson G5000 사용자 설명서
16
Setting Up the Projector
Connecting to Video Equipment
You can connect several video sources to the projector at the same
time. Before starting, look at your video equipment to determine its
available video output connections:
time. Before starting, look at your video equipment to determine its
available video output connections:
■
If your video player has a component video port (three connectors
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 19.
labeled either Y/Cb/Cr or Y/Pb/Pr), see “Connecting a
Component Video Source” on page 19.
■
If your video player has a yellow RCA video output connector, or
if you’re using a composite cable with a BNC connector, see
“Connecting a Composite Video Source” on page 17.
if you’re using a composite cable with a BNC connector, see
“Connecting a Composite Video Source” on page 17.
■
■
If your video player has an RGB video port (either a single
connector for a VGA monitor cable or three connectors labeled
R/G/B), see “Connecting an RGB Video Source” on page 20.
connector for a VGA monitor cable or three connectors labeled
R/G/B), see “Connecting an RGB Video Source” on page 20.
BNC connector
(component or
composite video)
RCA connector
(composite video)
S-video
connector
VGA connector
(RGB video)