Epson G5000 사용자 설명서
Setting Up the Projector
19
Connecting a Component Video Source
You will need a special cable to connect your component video
equipment to the VGA-style connector on the projector. You can
order a component-to-VGA cable (part number ELPKC19) from
Epson; see page 10 for more information.
equipment to the VGA-style connector on the projector. You can
order a component-to-VGA cable (part number ELPKC19) from
Epson; see page 10 for more information.
1. Locate a component-to-VGA cable.
2. Connect the cable to your player and the
Computer 1
or
Computer 2
connector on the projector.
3. You may need to change the
Input Signal
setting in the
projector’s Signal menu to
Component
4. To play sound, you can connect an optional stereo mini-jack
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
instructions on displaying and adjusting the image.
note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player’s documentation.
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player’s documentation.
Also, make sure the Input
Signal setting in the Signal
menu is set to
Signal setting in the Signal
menu is set to
Auto
or
Component Video
(see
Component-to-VGA cable