Epson G5000 사용자 설명서

Turn on any connected computer or video equipment before starting 
the projector so it can automatically detect and display the image 
source. If you turn on the projector first, or have multiple pieces of 
connected equipment, you may have to select the image source 
manually (see page 28). 

Follow these steps to turn on the projector: 

1. Remove the lens cover. 

2. Plug one end of the power cord into the projector, and the other 

end into an electrical outlet.

The Ppower light turns orange.

You can set the projector to 
automatically turn off the 
lamp and enter “sleep mode” 
when it has not received any 
signals for 10 minutes (see 
page 60 to enable, disable, 
or adjust this setting). This 
conserves electricity, cools the 
projector, and extends the 
life of the lamp. If you want 
to start projecting again, 
press the 

P

Power light