Epson G5000 사용자 설명서

■

If you’ve connected more than one computer and/or video source, 
you may need to press the 

Source Search

 button on the 

projector’s control panel, or the 

Search

 button or one of the 

Source

 buttons on the remote control to select the correct source. 

(Allow a few seconds for the projector to sync up after pressing the 
button.)

■

If you’re using a PC notebook, press the function key on your 
keyboard that lets you display on an external monitor. It may be 
labeled 

CRT/LCD

 or have an icon such as 

. You may have to 

hold down the 

Fn

 key while pressing it. Allow a few seconds for 

the projector to sync up after changing the setting. 

If you’re projecting from a notebook, and you can’t see your image on 
the projection screen and on your computer at the same time, follow 
these guidelines.

■

On most systems, there’s a function key that lets you toggle 
between the LCD screen and the projector, or display on both at 
the same time. It may be labeled 

CRT/LCD

 or have an icon such as 

. You may have to hold down the 

Fn

 key while pressing it. 

Allow a few seconds for the projector to sync up after changing 
the setting. 

■

If the function key doesn’t permit you to display simultaneously 
on both screens, you should check your monitor settings to make 
sure both the LCD screen and the external monitor port are 
enabled. 

From the Control Panel, open the 

Display

 utility. In the Display 

Properties dialog box, click the 

Settings

 tab, then click 

Advanced

. The method for adjusting the settings varies by 

brand; you may need to click a 

Monitor

 tab, then make sure the 

external Monitor port is set as your primary display and/or 
enabled. See your computer’s documentation or online help for 
details.