Epson G5000 사용자 설명서

You can check the projector’s ID by following these steps:

1. Point the remote control at the projector you want to check.

2. While holding the 

ID

 button, press the 

Help

 button. You see a 

message on the screen like this:

The remote control’s default ID is zero. This lets you operate any 
projector. To set it to operate a specific projector, follow these steps:

1. Move the remote control ID switch to the 

On

 position.

2. Press and hold the 

ID

 button on the remote control.

3. While holding the 

ID

 button, press a numbered button on the 

remote control (0 through 9) to select the desired ID. Select zero 
to control all projectors, or select a number to match the ID of the 
projector(s) you want to operate.

Off