Epson G5000 사용자 설명서

You may need to readjust the color as the lamp in your projector 
changes over time.

Although the projector normally detects and optimizes the input 
signal automatically, you can use the Signal menu to make manual 
adjustments. In addition to changing the position of the projected 
image, you can correct tracking and sync for computer images, or 
change the aspect ratio to widescreen format for video images. 

1. Press the 

Menu

 button and select the 

Signal

 menu. 

You see a screen similar to one of those below. (The settings will 
be different depending on the source you are projecting from.)

2. Use the 

pointer button to highlight the desired option, then 

adjust it as needed:

■

Auto Setup

 

Leave this setting 

On 

to automatically optimize computer 

images. Turn it off if you want to save adjustments you have 
made to the Tracking, Sync, and Position settings.

■

Resolution

Set to 

Auto

 to have the projector automatically identify the 

resolution of the input signal. If necessary (because some of 
the image is missing, for example), adjust to 

Wide

 or 

Normal

. You can also select 

Manual

 and specify a resolution.

Computer/RGB Video

Component Video/S-Video