Epson G5000 사용자 설명서
70
Maintaining the Projector
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
To remove dirt or smears on the lens, use a commercially available
cloth for cleaning glasses.
cloth for cleaning glasses.
Cleaning the Projector Case
Before you clean the case, turn off the projector and unplug the power
cord.
cord.
■
To remove dirt or dust, wipe the case with a soft, dry, lint-free
cloth.
cloth.
■
To remove stubborn dirt or stains, moisten a soft cloth with water
and a neutral detergent and firmly wring the cloth dry. Then wipe
the case.
and a neutral detergent and firmly wring the cloth dry. Then wipe
the case.
Cleaning the Air Filter
Your projector includes an air filter to ensure the best performance. If
dust collects on the air filter (on the side of the projector), clean it as
described below. Dust clogs prevent proper ventilation and can cause
overheating, which can damage the projector.
dust collects on the air filter (on the side of the projector), clean it as
described below. Dust clogs prevent proper ventilation and can cause
overheating, which can damage the projector.
Follow these steps:
1. Turn off the projector and unplug the power cord.
2. Grip the air filter cover tab and remove the air filter cover as
shown.
caution
Do not rub the lens with
harsh materials or subject
the lens to shocks, as it can
easily become damaged.
harsh materials or subject
the lens to shocks, as it can
easily become damaged.
caution
Do not use wax, alcohol,
benzene, paint thinner, or
other chemical detergents.
These can damage the case.
benzene, paint thinner, or
other chemical detergents.
These can damage the case.
note
To order replacement air
filters, request part number
V13H134A17. See page 10
for ordering information.
filters, request part number
V13H134A17. See page 10
for ordering information.