Epson cinema 550 사용자 가이드

Setting Up the Projector

Note: To keep children from turning on the projector, you can use the Child Lock (see page 31).

If you’ll be using the projector at an altitude above 4900 feet (1500 meters), turn on High Altitude 
Mode so the fan can properly cool the projector at the high altitude air pressure. See page 46 for 
details.

The projector takes about 10 seconds to warm up and display an image. If you don’t see a 
picture, you may need to change the image source as described on the next page.

1. Turn off any equipment connected to the projector.

2. Press the 

Off

 button on the remote control, or press the 

Power

 button on the projector 

twice. 

3. Let the projector cool down for about 30 seconds. 

4. When the Ppower light stops flashing and stays on, turn off the projector’s power switch 

on the back. 

It is now safe to unplug the projector, if necessary.

Caution: Turn the projector off when not in use. Continuous 24-hour-a-day use may reduce the 
overall life of the product. Never unplug the projector without turning it off and letting it cool as 
described above, or you could damage it and reduce lamp life.

The Source buttons on the projector and remote control let you switch between images from 
different pieces of equipment connected to the projector (such as a DVD player, cable or 
satellite box, or video game console). 

Press the 

Source

 button on the remote control that 

corresponds to the port to which your video source is 
connected.

Source 
buttons