Epson ES-600C 사용자 설명서

Self test

This test doesn’t read an image or send any image data. It

simply lets you see that the scanner is operating properly

before you connect it to your computer.

1. Open the document cover so you can see the operation of

the scanner during the self test.

2. Turn on the scanner by pressing the 

button.

When the scanner is initializing, the fluorescent lamps on the

carriage flash and the carriage’s position is reset. If the carriage

is not at the home position (the rear of the scanner), it moves to

the home position before checking the fluorescent lamps.

The scanner next goes through a lamp test sequence. The

carriage starts moving from the rear of the scanner (the home

position) toward the front, with the green lamp on.