Epson ES-600C 사용자 설명서

3. Connect the 36pin end of the cable to the scanner; then

fasten the connector with the clamps on the sides of the

connector.

For this model, you use either the Epson SCSI Kit for DOS

Computers or the Epson SCSI Kit for the Macintosh. The DOS

kit includes a SCSI board for your computer, a cable, and

software. You install the SCSI board in your computer,

following the instructions in your computer manual. Then

follow the directions below to connect your scanner and

computer. All Macintoshes have SCSI ports, so the Macintosh

kit contains only the cable and software. Follow the 

directions

below to connect the scanner to your Macintosh.