Epson ES-600C 제품 데이터시트

S c a n n i n g   s p e e d :

Monochrome mode:

about 20 seconds

Color page sequence mode:

about 70 seconds

Color line sequence mode:

about 80 seconds

Color separation: By switching light sources (G, R, B)

Reading sequence: Monochrome mode:

One-time scanning (Dropout color
selectable from Green, Red, or Blue.)

Color page sequence mode:

Three-time scanning (G, R, B)

Color line sequence mode:

One-time scanning (G, R, B)

Size: 50% to 200% in 1% steps.
Image data: 8 bits per pixel per color maximum
Gradation: 8 bits per pixel per color maximum
Brightness: 7 levels
Halftoning process: Enable/disable selectable.

3 halftoning modes (A, B, and C) and
4 dither patterns (A, B, C, and D) for

bi-level data

(Halftoning mode A only in color line

sequence mode)

(2 downloadable dither patterns)
Halftoning mode A for quad-level data

Gamma correction: 2 for CRT display

Color correction:

Interface:

Light source:
Reliability:

Dimensions and

weight:

3 for printer
1 for user defined

1 type for CRT display
3 types for printer output, available in

color line sequence mode only

Bidirectional parallel or SCSI

Noble gas fluorescent lamps (3 lamps)
Main unit: MCBF 100,000 cycles of
carriage movement

Width: 333 mm (13 inches)

Depth: 568 mm (22 inches)
Height: 125 mm (5 inches)
Weight: about 9 kg (20 lbs)

Voltage:

Frequency:

Power

consumption:

Insulation
resistance:

120 VAC, ± 10%

49.5 to 60.5 Hz

Approx. 20 W (self test in monochrome
mode)

10 

 between AC power line and

chassis at 500 VDC

Temperature:

Humidity:

Operation: 40° F to 95° F (5° C to 35° C)
Storage: 10° F to 150° F (-20° C to 60° C)

Operation: 10% to 80%, without

condensation

Operating

conditions:

Storage: 10% to 85%, without

condensation

Ordinary office or home conditions.
Extreme dust should be avoided.
Operation under direct sunlight
or near a strong light source should be

avoided.

OPERATE button Turns the scanner on and off. When

the power is turned on, the scanner

is reset.

RESET button Initializes the scanner. Every value is

reset to the default value. The RESET

button is located under the

DIP-switch cover.

READY (green LED) Comes on when the scanner is ready

to receive data.

ERROR (red LED) Indicates that an error has occurred.