Epson GT-15000 사용자 설명서

How To Scan

You can use the a Start button on your scanner to open EPSON Scan, and then scan 
your document as described below. Or, you can set up the a Start button to open any 
compatible program on your computer and start scanning.

If you have set up the scanner on a network, you can use the a Start button to scan 
automatically and send the document to an individual computer. For instructions on 
network scanning, see your on-screen Reference Guide.

First, place your document or photo on the scanner as described on page 20. Then 
follow these steps to use the a Start button:

1. Press the a Start button. 

If you’re using Windows 98, Me, 
or 2000, EPSON Scan opens and 
you’re ready to scan. If you want 
to have a different application 
open, see the instructions on the 
next page.

If you’re using Windows XP, you 
see this window:

2. Select the program you want to use. 

To have the program open automatically 
whenever you press the a Start button, check 

Always use this program for this action.

3. Click 

OK

. 

Note: If you want to change the program after 
you set up the a Start button, do the following. 
Open the Scanners and Cameras utility in the 
Windows Control Panel, right-click 
EPSON GT-15000 and select Properties. Click 
the Events tab and choose the Start Button. 
Under Actions, select the program you want 
the a Start button to start.

a

 

Start button