Epson 2450 빠른 설정 가이드
3
3
Connect the Scanner
viewing on the Web, select 72 to 96 dpi.
sending via e-mail, select 96 to 150 dpi.
printing, select a higher resolution based on the image type,
such as the following:
such as the following:
Service
Access
World Wide
From the Internet, you can reach EPSON Support at
Web
http://support.epson.com. At this site, you can download drivers and
other files, look at product documentation, access troubleshooting
information, and receive technical advice through e-mail.
other files, look at product documentation, access troubleshooting
information, and receive technical advice through e-mail.
Automated
A variety of automated help services are available 24 hours a day,
Telephone
7 days a week. To use these services, you must have a touch tone
Services
telephone and call (800) 922-8911. Your EPSON SoundAdvice
SM
Express Code is 70365. Use this code to quickly select your
scanner in SoundAdvice.
scanner in SoundAdvice.
Recommended Settings
Where To Get Help
Your scanner includes a variety of printed and electronic manuals. See your
Scanner Basics book for a list of the available resources.
Scanner Basics book for a list of the available resources.
EPSON provides technical assistance 24 hours a day through the electronic
support services and automated telephone services listed here:
support services and automated telephone services listed here:
EPSON is a registered trademark and EPSON Smart Panel is a trademark of SEIKO EPSON CORPORATION.
EPSON Perfection is a registered trademark and SoundAdvice is a service mark of Epson America, Inc.
EPSON Perfection is a registered trademark and SoundAdvice is a service mark of Epson America, Inc.
General Notice: Other product names use herein are for identification purposes only and may be trademarks of
their respective owners. EPSON disclaims any and all rights in those marks.
their respective owners. EPSON disclaims any and all rights in those marks.
Printed on recycled paper
Printed in USA
Copyright © 2001 by Epson America, Inc.
Printed in USA
Copyright © 2001 by Epson America, Inc.
9/01
CPD-12888
When you use EPSON Smart Panel, the software automatically selects
the best settings for your scan. If you want to select settings yourself,
see “Advanced Scanning” in your Scanner Basics book for instructions
on using Manual mode.
the best settings for your scan. If you want to select settings yourself,
see “Advanced Scanning” in your Scanner Basics book for instructions
on using Manual mode.
For the best scans, select a resolution setting (in dpi—dots per inch) that
balances quality with file size. The optimum resolution depends on
how you plan to use your scanned image.
balances quality with file size. The optimum resolution depends on
how you plan to use your scanned image.
To scan an image for:
For additional help information and help with your software, see “Where To
Get Help” in your Scanner Basics book.
Get Help” in your Scanner Basics book.
Scanning resolution
Image type
(for printing)
Photograph or magazine
300 dpi
Small photograph to be enlarged
300 dpi to 3200 dpi
Newspaper (text only), text for OCR, text with images
400 dpi
Line art
300 to 3200 dpi
35 mm film (negative) or 35 mm slide (positive)
300 to 3200 dpi
1
Use a coin to turn the transportation
lock clockwise one-quarter turn to
unlock the scanner carriage.
lock clockwise one-quarter turn to
unlock the scanner carriage.
2
Remove the white sticker from
the back of the scanner.
the back of the scanner.
3
Connect the cable for the built-in
transparency unit to the round
connector on the back of
the scanner.
transparency unit to the round
connector on the back of
the scanner.
4
Connect either the USB interface cable that comes with your
scanner or an optional IEEE 1394 cable.
Don’t connect both.
scanner or an optional IEEE 1394 cable.
Don’t connect both.
If you’re using USB...
Plug the square end of the
USB cable into the scanner’s
USB port. Then plug the
flat end into any available
USB port on your computer
or USB hub.
USB cable into the scanner’s
USB port. Then plug the
flat end into any available
USB port on your computer
or USB hub.
If you’re using IEEE 1394...
Plug one end of the IEEE 1394 cable
(not included) into the scanner’s
IEEE1394 port. Then plug the
other end into the IEEE 1394
port on your computer.
(not included) into the scanner’s
IEEE1394 port. Then plug the
other end into the IEEE 1394
port on your computer.
5
Plug the scanner’s power cord into a grounded electrical outlet.
6
Press the power button on the front of the scanner to turn it on.
The scanner lamp comes on.
The scanner lamp comes on.
Your scanner may not work correctly if you use a USB cable
other than the one supplied by EPSON or if you connect
your scanner to a multi-level USB hub system.
other than the one supplied by EPSON or if you connect
your scanner to a multi-level USB hub system.
power button
2
Press the Start button on the scanner. EPSON Smart Panel
opens on your computer.
opens on your computer.
3
Click the Scan to Application icon. A progress meter appears
on your screen and your document is scanned automatically.
on your screen and your document is scanned automatically.
4
When scanning is finished, you see a window like the one below.
To scan another document, place it on the scanner, close the cover,
and click Scan More. Otherwise, click Finish.
To scan another document, place it on the scanner, close the cover,
and click Scan More. Otherwise, click Finish.
5
Select the application you want to use and click Launch.
6
The selected application opens and your scanned image appears
on screen. Follow the application instructions to modify, print,
and save the image as necessary.
on screen. Follow the application instructions to modify, print,
and save the image as necessary.
to scan again,
click Scan More
click Scan More
click Finish when
you’re done
you’re done
click the file
name to change
it, if you want
name to change
it, if you want
4
4
Your First Scan
1
Open the scanner cover and place your document face down
on the document table as shown. Then close the scanner cover.
on the document table as shown. Then close the scanner cover.
Start button
place document
in upper right
corner
in upper right
corner
In Windows 2000, you see the Digital Signature Not Found window
after turning on your scanner. Click Yes to continue.
after turning on your scanner. Click Yes to continue.
remove sticker
select an
application
application
click Launch