Clarity C2210 사용자 가이드

26

Operate
•Check all phone cords and connec-

tions. Make sure they are plugged in 

securely.

•Switch out handset or telephone 

line cords.

•Disconnect any other equipment that  

may be attached to the phone.

•Make sure TONE/PULSE switch is set 

correctly.

•Phone may be at the end of a long 

line of phones (loop). Phone may not 

be getting enough power from the 

phone line. It may be necessary to 

wait for a few seconds after lifting   

the handset to begin dialing.

Cannot Hear You
•Too many phones or phone devices 

on the line may effect your phone’s 

transmission.As a guideline, more 

than five (5) phones or phone devices 

may  overload the phone line.

Disconnect one (1) or two (2) devices 

to see if that eliminates the problem.

If not, contact your local phone com-

pany for load guidelines.

•You may not be speaking directly into 

the transmitter.Always speak directly 

into the mouth piece in your normal 

tone of voice.

Unable To Hear Phone Ringer
•Make sure the Ringer OFF/ON      

setting is set to ON. Increase the 

volume of the ring if necessary.

•Too many phone or phone devices on 

a line may cause your phone to not 

ring. Disconnect one (1) or two (2) 

of the devices to see if the problem is 

eliminated. If not, contact your local 

phone company for load guide lines.

Volume Control Does Not Work
•BOOST must be activated to turn on 

the additional amplification.

Memories Do Not Work
•Press the MODE key to confirm the 

easy mode state. If the telephone is 

in EASY mode, these features will not 

work.Turn off EASY mode (in Setup 

Menu) if you wish to use these        

features (see page 12).