PSB chs212 사양 가이드
25.5"
648mm
17.5"
445mm
18.875"
479mm
19.625"
498mm
w/grille
• In-Cabinet performance comparable to the PSB
SubSonic 10 subwoofer
• High power/high excursion dual 12” woofers - forward
and downward fi ring
• Front-mounted volume and crossover frequency
controls,
rear phase switch
• 500W Continuous, 750W Dynamic, 1500W Peak,
Class H Amplifi er
• Tough, textured, matte black fi nish
Frequency Range (-6dB):
27-150Hz
Recommended Power:
(internal amplifi er)
500W Continuous
750W Dynamic
1500W Peak
Class H MOSFET
Drivers:
2 x 12” Woofers
Dimensions (W x H x D):
17 1/2 x 25 1/2 x 19 5/8” (grille on)
17 1/2 x 25 1/2 x 18 7/8” (grille off)
CHS212 Dual 12” In-Cabinet Subwoofer
w w w. p s b s p e a k e r s . c o m
1 8 8 8 7 7 2 0 0 0 0
• The front fi ring and down fi ring woofers
should be near a cabinet opening or grille.
• The CHS212 amplifi er typically runs cool but
should have some airspace behind the rear
panel.
• Slowly run a sweeping bass test tone or
use a music disc with heavy bass to fi nd
equipment cabinet vibrations.
• Fix vibrations by fastening down unstable
panels or isolating them with foam or felt
materials.
• Engage crossover bypass switch when
utilizing crossover in preamp or receiver.
• If possible remove bottom shelf of cabinet
and place directly on the fl oor
• Consult owner’s manual for phase and
variable crossover adjustments. This will
affect upper bass level and transition to front
channels.
• Confi rm that AV controller or receiver’s bass
controls are properly set (“large”, “small”,
etc.).
• See manual for more installation hints.
Installation Notes
PSB Speakers reserves the right to change specifications or features without notice.
© 2004 PSB Speakers, a division of Lenbrook Industries Limited.
PSB is a registered trademark of Lenbrook Industries Limited. Printed in Canada 10/04. All rights reserved.
No part of this publication may be reproduced, stored or transmitted in any form whatsoever without the written permission of PSB Speakers.
To Reach US Customer Service dial 1 888 772 0000 ext 4445 or 4342
Note: Depth dimensions exclude front knobs and rear speaker connectors.
Add 1 1/2” plus required wire spacing.
Add 1 1/2” plus required wire spacing.