Lexmark Pro715 사용자 가이드
Tips:
•
The default code for answering faxes manually is *9*, but for increased security, you can change it to a number
that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and
the characters # and *.
that only you know. You can enter up to 7 characters for your code. The valid characters are the digits 0–9 and
the characters # and *.
•
Make sure that the telephone is plugged into the
port on the back of the printer and that the printer is
connected to the wall jack through the port.
Faxing FAQ
If I skipped the fax setup initially, do I need to run the installer again to set up the
fax?
fax?
You do not need to run the installer again. You can set up and configure the fax through the fax software that was
installed with the printer software.
installed with the printer software.
1
Connect the printer to the telephone line. For more information, see “Setting up the printer to fax” on page 73.
2
Configure the fax settings using the fax software. To access the fax software:
For Windows users
a
Click
or Start.
b
Click All Programs or Programs, and then select the printer program folder from the list.
c
Click Printer Home > Fax >Set up the printer to fax.
The Fax Setup Wizard opens.
The Fax Setup Wizard opens.
d
Run the wizard. Make sure you select the correct telephone service and connection. The wizard configures
optimal fax settings based on your connection.
optimal fax settings based on your connection.
For Macintosh users
a
From the Applications folder in the Finder, or from the Finder desktop, double-click the printer folder.
b
Double-click Printer Settings, and then configure the fax settings.
What is a splitter and what type of splitter should I use?
If there are limited wall jacks in your home or limited ports on your adapter, then you can use a phone splitter. A
splitter splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more
ports where you can plug the devices. Do not use a line splitter.
splitter splits the telephone signal and allows you to connect multiple devices to the wall jack. It has two or more
ports where you can plug the devices. Do not use a line splitter.
To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a
dial tone.
dial tone.
What is my fax number?
In most cases, your telephone number is also your fax number. If you subscribe to the Distinctive Ring Pattern
Detection (DRPD) service offered by telephone companies, then your fax number is the number that you assigned to
the printer. Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in
the Fax Setup menu of the printer control panel.
Detection (DRPD) service offered by telephone companies, then your fax number is the number that you assigned to
the printer. Make sure that you enter the correct distinctive ring pattern for that number in the fax software or in
the Fax Setup menu of the printer control panel.
Faxing
91