TallyGenicom 930 사용자 가이드
E-22
Section 2
and platen. Remove any loose bits of paper.
4. Reinstall the pull-up roller assembly, and close the access
cover.
Cleaning the Housing
You should clean the printer every six months (or after
about 300 hours of operation).
about 300 hours of operation).
Note: Never use solvents or strong detergents on the
cabinet: they could damage the housing.
1. Turn the printer off, and remove any paper from the
path.
2. Open the access cover, remove the pull-up roller assem-
bly.
3. Use a clean, dry cloth to dust around the carriage shaft
Sec2.p65
10/3/97, 9:31 AM
22