GoVideo vr1940 제품 매뉴얼

Follow these steps to record from a 
camcorder or other external device.

Connect your external device to the 
front panel or rear panel inputs; see 
pages 18-19.

Insert a recordable disc or VHS tape.

Press INPUT repeatedly to select:
AV1-Front - For a device connected 
to the front Audio/Video Input.
AV2-Rear - For a device connected to 
the rear Audio/Video Input.
S-Video - For a device connected to 
the rear S-Video Input.
DV - For a device (such as a digital 
camcorder) connected to the front 
DV Input with a DV cable.

Press DVD to control the DVD deck or 
VCR to control the VCR deck.

Cue the external device and start 
playback at the beginning of the 
scene you wish to record.

Press REC on the DVD 
Recorder+VCR to start recording.
•  To pause recording, press PAUSE.
•  To resume recording, press PAUSE 

or REC.

•  To add recording time in 30-minute 

increments, see One-Touch Record-
ing at right.

When finished, press STOP to stop 
recording.
•  To watch your recording, see page 

39.

•  Connect a DV-compatible camcorder 

to the front panel DV jack with a IEEE-
1394 4-pin DV cable (not included).

•  A single DV cable is used for input 

and output of audio, video, data, and 
control signals.  

•  After recording stops, a DV control 

bar appears on screen.  You can use 
this control 
bar to Stop, 
Play, Pause, 
Fast-For-
ward, and 
Rewind the 
DV cam-
corder us-
ing your DVD Recorder+VCR remote 
control.

•  Press REC repeatedly to add record-

ing time in 30-minute blocks (up to 
6 hours or the time remaining on the 
tape or disc).

•  To cancel One-Touch Recording, press 

REC until “OTR” disappears from the 
on-screen display.

Tape Control