TallyGenicom ml320 설치 설명서
Publication No. GEG-99122
Genicom
Sep 01
B-2
GENICOM LN45 and Intelliprint mL450 Installation Guide
Safety Notes
Safety Notes
About this Appendix
Describes cautions to take when installing, transporting, or operating the printer. Also includes
applicable regulatory compliances of your printer.
applicable regulatory compliances of your printer.
Safety Notes
Power Source, Power Cord and Accessory Cable Precautions
If you use a cord with an unspecified current rating, the machine or plug may emit smoke
or become hot to the touch externally.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord. Do not
place a heavy object on the cord. A damaged cord can cause a fire or shock hazard.
Never touch a power cord with wet hands. Danger of electric shock exists.
If the power cord is broken or insulated wires are exposed, contact your point of purchase
for a replacement. Using a damaged cord can cause a fire or shock hazard.
When unplugging the machine, grasp the plug instead of the cord. Forcibly pulling on a
cord can damage it and cause a fire or shock hazard.
Be sure to switch off and unplug the machine before accessing the interior of the machine
for cleaning, maintenance, or fault clearance. Access to a live machine's interior can cause a
shock hazard.
When the machine is not used over an extended period of time, switch it off and unplug it.
If an unused machine is left connected to a power source for a long period, degraded insu-
lation can cause a shock, leak current, or fire hazard.
Once a month, unplug the machine and check the power cord for the following.
z
The power cord is plugged firmly into a receptacle.
z
The plug is not excessively heated, rusted, or bent.
z
The plug and receptacle are free of dust.
z
The cord is not cracked or frayed.
WARNING: Two power specifications are listed below. The specifications that apply to your
machine depend on your machine configuration. Connect the power plug only to a properly
rated power outlet. Otherwise, it can cause a fire or shock hazard. If in doubt, contact your
point of purchase.
machine depend on your machine configuration. Connect the power plug only to a properly
rated power outlet. Otherwise, it can cause a fire or shock hazard. If in doubt, contact your
point of purchase.
Rated voltage 110V
Rated frequency 50/60Hz
Rated frequency 50/60Hz
Rated voltage 220-240V
Rated frequency 50/60Hz
Rated frequency 50/60Hz
WARNING: Never use multi-plug adaptors to plug multiple power plugs in the same outlet.
Be sure to operate the machine on a sole-use receptacle. Multiple connectors can cause
the outlet to overheat and cause a fire. Use of controls, adjustments or performance of
procedures other than those specified in this manual may result in hazardous laser radia-
tion exposure.
Be sure to operate the machine on a sole-use receptacle. Multiple connectors can cause
the outlet to overheat and cause a fire. Use of controls, adjustments or performance of
procedures other than those specified in this manual may result in hazardous laser radia-
tion exposure.