GoVideo d2730 제품 매뉴얼

D2730 Networked DVD Player

Install Network Card

To install the network card:
1 Do not plug in the unit or press the POWER button on the front

panel until you have installed the network card.

2 Insert the supplied network card into the NETWORK CARD

slot on the back of the DVD player.

• Optionally, you can insert a compatible 802.11b network

card (not included) if connecting the player to a wireless net-

work.

3 Make sure the network card is properly seated.

4 Connect an Ethernet cable from the network card to any available Ethernet port on your existing home network.

:: Step 4 - Turn on the System

1 Connect the DVD player’s power cord to a standard electrical outlet.
2 Turn on the DVD player using the front panel POWER button.

• When the unit is powered on, a blue LED will glow around the front panel arrow keys.
• Use the STANDBY/ON button on the remote control to switch between on and Standby modes.
• When the unit is in Standby mode, the blue LED will turn off.

3 Turn on your TV, and select the video input connected to the DVD player.
4 Turn on your audio system (if applicable), and select the input connected to the DVD player.
5 The GoVideo splash screen will appear on your TV.

• Do not remove the network card when in use!

• If the card is removed, all activities will be reset and the net-

worked DVD player will return to its initial state.

• Basic Setup is complete! Please refer to Chapters 3 and 4 to begin enjoying

the networking and DVD playback features of your D2730.

• For advanced settings, please refer to Chapter 5.

Insert Network Card

Insert Ethernet Cable