GoVideo dv2150 빠른 참조 카드

Antenna/Cable

DVD+VCR

Television

OR

UNPACK YOUR DVD+VCR
•  DV2150 DVD+VCR (1)  
• Remote 

control 

(1)

•  1.5V AAA alkaline batteries (2) 
•  RF (Antenna) cable (1)
• Audio/video 

cable 

(1)

• User’s 

guide 

(1)

•  Quick reference guide (1)
•  Product registration card (1)

INSERT REMOTE CONTROL BATTERIES 
1  Remove battery cover on back of remote control. 

2  Insert two 1.5V AAA batteries, paying attention to the 

correct polarities (+/-). 

3 Replace cover.

AUTO SEARCH FOR CHANNELS
1   Press SETUP to display the SETUP menu.

2   Use the     /     buttons to select CHANNEL SET and press ENTER.

3   Use the     /     buttons to select AUTO CHANNEL SEARCH and press ENTER.

4   Use the     /     buttons to select “Detect Automatically” and press ENTER.

•  Auto Channel Search detects whether you are using an Antenna or Cable TV and 

memorizes all available channels automatically. This may take several minutes.

•  When Auto Channel Search is complete, the DVD+VCR will display the lowest 

channel found.

5   To browse memorized channels, press the CH+/- buttons.

1 

2 

4 

A/V IN

ANT. IN

BASIC CONNECTIONS 
1  Connect your antenna or cable TV wall outlet to the IN (FROM ANT.) jack on 

the DVD+VCR rear panel.

2  Connect the OUT (TO TV) jack on the DVD+VCR rear panel to your TV’s 

Antenna Input using the supplied RF antenna cable.

 OR 
 

For improved picture quality, connect the VIDEO OUT jacks on the back 

panel of the DVD+VCR to your TV's Line In jacks using the supplied 
audio/video cable.

3   Plug in the DVD+VCR. 

4   Press the POWER button on the remote control or front panel of the unit.

5   Press the POWER button on your TV.

For cable box 

or satellite 

receiver 

connections, 

please see 

page 13 of the 

user’s guide.

6   Set your TV to Channel 3.  If you used the Video Out connections, 

set your TV to its line or video input.
• You 

must use either the Antenna or Line connection between 

your TV and DVD+VCR, even if you plan to use the S-Video 
or Component Video Output for improved DVD picture quality. 
The S-Video and Component Video Outputs are for DVD 
playback only!

for Cable Box and other advanced connections
please refer to the User’s Guide

[