Gateway m465 참조 가이드
Troubleshooting
87
■
The diskette may be full. Delete
unnecessary files on the diskette and try
again.
unnecessary files on the diskette and try
again.
■
Not all diskettes are IBM-compatible. Make
sure that the diskette you are using is
IBM-compatible.
sure that the diskette you are using is
IBM-compatible.
■
Try a different diskette. Occasionally
diskettes are flawed and cannot be read by
the diskette drive.
diskettes are flawed and cannot be read by
the diskette drive.
You see a “Disk is full” error message
■
Delete unnecessary files on the diskette.
■
Try a different diskette. Occasionally
diskettes are flawed and cannot be read by
the diskette drive.
diskettes are flawed and cannot be read by
the diskette drive.
■
Run Error checking on the diskette. If errors
are detected and corrected, try using the
diskette again. For instructions on running
Error checking, see “Checking the hard
drive for errors” in the online User Guide.
are detected and corrected, try using the
diskette again. For instructions on running
Error checking, see “Checking the hard
drive for errors” in the online User Guide.
You see a “Non-system disk”, “NTLDR is
missing”, or “Disk error” error message
missing”, or “Disk error” error message
■
Eject the diskette from the diskette drive,
then press E
then press E
NTER
.
■
Make sure that the diskette you are using
is IBM-compatible.
is IBM-compatible.
The modular drive status indicator is lit
continuously
continuously
■
Remove the diskette from the drive. If the
indicator stays on, try restarting your
notebook.
indicator stays on, try restarting your
notebook.
Display
The screen is too dark
Tips & Tricks
For more information
about adjusting the
brightness, see
Adjust the brightness using the system keys.