BG 210i 사용자 가이드
© BG Corp 2005
13
Assembly Instructions for 520i / 420i Loudspeaker
3. Holding the base and using the Allen (hex) wrench remove 1/4” machine
screws from the wooden base (Fig. 1). DO NOT allow the base to rotate
as the upper surface of the base has a glossy finish that can be scratched
by the edge of aluminum extrusion. Depending on how you positioned the
loudspeaker, the base may either drop or the loudspeaker will shift when
the last screw is detached if the loudspeaker does not have support.
as the upper surface of the base has a glossy finish that can be scratched
by the edge of aluminum extrusion. Depending on how you positioned the
loudspeaker, the base may either drop or the loudspeaker will shift when
the last screw is detached if the loudspeaker does not have support.
4. Remove the metal stand and spiked feet from the packing box.
Caution! Use care when handling the stand. The spiked feet
are very sharp and can cause injury.
are very sharp and can cause injury.
Fig. 1 Removing the base.
Special Assembly Instructions