Sony ht-ct260 사용자 가이드
34
GB
direct command from the remote control and
the command via the Sound Bar.
the command via the Sound Bar.
• If the Sound Bar is placed where it does not
obstruct the remote control sensor of the TV,
be sure to set IR REP. to “OFF”.
be sure to set IR REP. to “OFF”.
• On some TVs, this function does not work.
In this case, move the Sound Bar to another
location.
location.
The current firmware version
information appears on the front panel
display.
information appears on the front panel
display.
You can specify the wireless connection
to be used to link the Sound Bar to the
subwoofer using the Secure Link
function.
This function is useful when you use
multiple wireless products.
to be used to link the Sound Bar to the
subwoofer using the Secure Link
function.
This function is useful when you use
multiple wireless products.
1
Press AMP MENU.
2
Select “WS” in the AMP menu,
then press
then press
or
c.
3
Select “S. ON,” then press
or
c.
4
“START” appears, then press
.
“SEARCH” appears, and the Sound
Bar searches for equipment that can
be used with Secure Link.
Proceed to the next step within 2
minutes.
Bar searches for equipment that can
be used with Secure Link.
Proceed to the next step within 2
minutes.
To quit the Secure Link function
during a search for equipment, press
C.
during a search for equipment, press
C.
5
Press SECURE LINK on the rear
of the subwoofer with the point
of a pen, etc.
of the subwoofer with the point
of a pen, etc.
The ?/1 indicator on the subwoofer
lights in amber. “SUCCEED”
appears on the front panel display.
If “FAILED” appears on the front
panel display, check to ensure the
subwoofer is turned on, and try to
perform the process again from
step 1.
lights in amber. “SUCCEED”
appears on the front panel display.
If “FAILED” appears on the front
panel display, check to ensure the
subwoofer is turned on, and try to
perform the process again from
step 1.
6
Press AMP MENU.
The AMP menu turns off.
1
Press AMP MENU.
2
Select “WS” in the AMP menu,
then press
then press
or
c.
3
Select “S. OFF,” then press
or
c.
4
“RELEASE” appears, then press
.
“FINISH” appears on the front panel
display.
display.
5
Press AMP MENU.
The AMP menu turns off.
6
Press and hold SECURE LINK on
the rear of the subwoofer for
several seconds until the ?/1
indicator turns green or flashes
in green.
the rear of the subwoofer for
several seconds until the ?/1
indicator turns green or flashes
in green.
Be sure to press SECURE LINK
with the point of a pen, etc.
with the point of a pen, etc.
Checking the version of
the Sound Bar
(VERSION)
the Sound Bar
(VERSION)
Activating wireless
transmission between
specific units (S. ON)
transmission between
specific units (S. ON)
Cancelling the Secure
Link function (S. OFF)
Link function (S. OFF)