Sony kdf-42we655 사용자 가이드

KDF-WE/WF655

2-059-370-11 (1)

For best results, use this connection if:
❑

Your cable company scrambles all channels, which requires you to use a 
cable box.

❑

You do not have a VCR. (If you have a VCR, see pages 39 and 40.)

With this connection you can:
❑

Use the LCD projection TV’s remote control to change channels 
coming through the cable box to the LCD projection TV’s VHF/UHF 
jack. (You must first program the remote control for your specific cable 
box.) 

Connect the CATV cable to the cable box’s input jack.

Use a coaxial cable to connect the cable box’s output jack to the LCD 
projection TV’s VHF/UHF jack.

Run Auto Program, as described in “Setting Up the LCD Projection TV 
Channel List” on pages 58.

✍

With this connection, all channels come into the LCD projection TV 
through your cable box and only one unscrambled signal is sent to the 
LCD projection TV, so you cannot use the dual picture features. If some 
of your channels are scrambled, but others are not, consider using the 
“Cable Box and Cable” connection on page 34 instead.

VHF/UHF

Use the cable box

Tune the LCD projection TV to the channel the cable box is set to 
(usually channel 3 or 4) and then use the cable box to switch 
channels.

Set up the LCD projection TV remote control to 
operate the cable box

Program the remote control. See “Programming the Remote 
Control” on page 62.

Activate the remote control to operate the cable 
box

Press 

SAT/CABLE FUNCTION

 once, and the 

SAT/CABLE

 

indicator lights up.

Prevent the accidental switching of TV channels When using the cable box, the LCD projection TV must stay on the 

channel the cable box is set to (usually channel 3 or 4). You can use 
the LCD projection TV’s Channel Fix feature to lock in a specific 
channel. For details, see “Using the Channel Menu” on page 106.

01COV.book  Page 35  Thursday, July 15, 2004  7:31 PM