Sony KDP-51WS550 사용자 가이드
32
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Satellite Receiver
and VCR
and VCR
To connect a satellite receiver and VCR
1
Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
satellite input jack.
2
Connect the CATV cable to the VCR’s VHF/UHF input jack.
3
Use a coaxial cable to connect the VCR’s VHF/UHF output jack
to the TV’s CABLE jack.
to the TV’s CABLE jack.
4
Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the VCR’s A/V input jacks.
jacks to the VCR’s A/V input jacks.
5
Use an A/V cable to connect the VCR’s A/V output jacks to the
TV’s A/V input jacks.
TV’s A/V input jacks.
6
Run the Auto Setup program, as described in “Setting Up the
Channel List” on page 41.
Channel List” on page 41.
Notes on Using This Connection
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 49-50.
remote control. See “Programming the Remote Control” on pages 49-50.
Activate the TV remote
control to operate the satellite
receiver or VCR
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION
. For the VCR, open the
outside cover, as shown on page 48. Then set the A/V slide switch to the
position you programmed for the VCR.
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 103-104.
AX1 PJ.book Page 32 Wednesday, April 30, 2003 2:13 PM