Sony Ericsson S500i 사용자 가이드
4
Getting started
Getting started
Assembly, SIM card, battery, turning
on, help, calls.
on, help, calls.
Assembly
Before you start using your phone, you
need to insert a new SIM card and the
battery.
need to insert a new SIM card and the
battery.
SIM card and battery
To insert SIM card and battery
1
Turn off the phone. Remove the
battery cover by sliding the battery
release latch down.
battery cover by sliding the battery
release latch down.
2
Slide the SIM card into its holder with
the contacts facing up.
the contacts facing up.
3
Insert the battery with the label side up
and the connectors facing each other.
and the connectors facing each other.
4
Slide the battery cover into place.
Battery
To charge the battery
1
Connect the charger to the phone.
Wait approximately 2.5 hours or until
the battery icon indicates a full charge
before removing the charger.
Wait approximately 2.5 hours or until
the battery icon indicates a full charge
before removing the charger.
2
Remove the charger plug by pulling
up and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk time
or standby time becomes noticeably
shorter, replace the battery. Only
use approved batteries from
Sony Ericsson
up and out.
Some functions use more battery
power than others and may require
more frequent recharging. If talk time
or standby time becomes noticeably
shorter, replace the battery. Only
use approved batteries from
Sony Ericsson
Do not connect the charger unless the
battery is inserted.
battery is inserted.
≈
2.5 h
This is the Internet version of the User's guide. © Print only for private use.