Speco cvc-614c 지침 매뉴얼
Speco Technologies CVC-614C : CVC-865DN/24
Instruction Manual
Instruction Manual
6
INSTALLING THE LENS
1. Remove the lens cap from the front of the camera.
2. If you are using a C mount lens, make sure that the C mount adaptor ring is in place.
3. If you are using a CS mount lens, remove the C mount lens ring adapter.
4. When using a fixed iris lens, switch the shutter control to AES ON.
5. When using a manual adjustable iris lens, switch the shutter control to AES ON.
6. When using a Video servo auto iris lens or DC servo auto iris lens, switch the
shutter control to AES OFF.
2. If you are using a C mount lens, make sure that the C mount adaptor ring is in place.
3. If you are using a CS mount lens, remove the C mount lens ring adapter.
4. When using a fixed iris lens, switch the shutter control to AES ON.
5. When using a manual adjustable iris lens, switch the shutter control to AES ON.
6. When using a Video servo auto iris lens or DC servo auto iris lens, switch the
shutter control to AES OFF.
AUTO IRIS LENS CONNECTIONS
1. When using auto iris lens (with EE amp)
Set the lens selector to the "Video" position.
PIN DEFINITION
LENS CABLE LEAD
1
DC +12 V
Red
2
Video iris
White
3
NC
4
Ground Black
2. DC servo auto iris lens (without EE amp)
Set the lens selector to the "DC" position.
PIN DEFINITION
1
Damping -
2
Damping +
3
Driving+
4
Driving-
To ensure correct lead connection, please refer to the instructions on the lens.