Suunto advizor 사용자 가이드

40

5.3 SEA LEVEL PRESSURE SUB MODE

Sea level pressure is pressure relative to sea level whereas the pressure read in the main barometer display is absolute
pressure in the current location.

In the Barometer mode, PRESS the [Select] button three times to enter this sub mode.

In the sea level pressure mode (Fig. 49):

•

Field 1 displays the text “SEA”;

•

Field 2 displays the current sea level pressure; and

•

Field 3 displays the current time.

5.3.1 Setting the Sea Level Pressure

If the altitude is not known, setting the sea level pressure can be used in setting the altitude measurement on the Wristop
Computer.

To set the sea level pressure (Fig. 50):

1. PRESS the [Select] button and hold in for 2 seconds. Located in Field 2, the current sea level pressure will begin to

flash.

2. PRESS the [+] button to scroll the pressure upward or PRESS the [-] button to scroll the pressure downward.

3. At the desired pressure, PRESS the [Mode] button to accept the changes and return to the main mode.

Once the user completes this process, the altitude measurement on the Wristop Computer is correct within approximately
ten meters or 30 ft.