Suunto g9 사용자 가이드
46
3.5.2. Set menu
The Set menu allows you to store the locations of different obstacles hole by hole in
the Suunto G9 memory. To enter the Set menu, short press
The Set menu allows you to store the locations of different obstacles hole by hole in
the Suunto G9 memory. To enter the Set menu, short press
Enter.
The following locations are available: Pin, Green, Tee, Bunker, Water, Lay-Up and
Rough.
Rough.
To store the location:
1. Walk to the specific location on the course.
2. Scroll to the corresponding obstacle with the arrow
1. Walk to the specific location on the course.
2. Scroll to the corresponding obstacle with the arrow
buttons and short press
Enter. Suunto G9 stores the
location once the EPE (Estimated Position Error) falls
below 10 meters.
below 10 meters.
3. To move to the next hole, select
Done.
NOTE: If a course has not been activated or the current
course does not contain any memorized features, Suunto
G9 will advise you to mark a point on the main display.
course does not contain any memorized features, Suunto
G9 will advise you to mark a point on the main display.
NOTE: Suunto G9 allows you to store up to 9 features
for each hole. Four of them are fixed (Tee, Pin, Green,
Lay-Up). When you store one of these again, it overwrites
the similar older feature. The other features allow you to
store multiple locations. Suunto G9 then displays a
number after the feature (for example when 2 bunkers
are stored the unit displays a bunker and bunker1).
for each hole. Four of them are fixed (Tee, Pin, Green,
Lay-Up). When you store one of these again, it overwrites
the similar older feature. The other features allow you to
store multiple locations. Suunto G9 then displays a
number after the feature (for example when 2 bunkers
are stored the unit displays a bunker and bunker1).