KYOCERA fs-1128 설치 설명서
Panel Setup
SETUP GUIDE
11
4
Press [OK]. The Time Zone screen appears.
5
Press U or V to select the time zone that you are in.
6
Press [OK]. The time zone is set and the Date Setting menu reappears.
Summer Time Setting
Perform the following procedure to turn the summer (daylight saving) time setting on
and off.
and off.
NOTE:
This setting is valid only in the area where summer time is observed.
1
In the Date Setting menu, press U or V to select Summer Time.
2
Press [OK]. The Summer Time screen appears.
3
Press U or V to select whether summer time is enabled.
4
Press [OK]. The summer time is set and the Date Setting menu reappears.
Setting the Current Date and Time
Perform the following procedure to set the current date and time.
NOTE:
Periodically check the time that is shown in the message display and adjust
as necessary to match the current time.
1
In the Date Setting menu, press U or V to select Date/Time.
2
Press [OK]. The Date/Time screen (month:day:year) is appears.
3
To set the date, for each field press U or V as many times as necessary to display
the correct value then press Z to move to the next field.
the correct value then press Z to move to the next field.
Use Y and Z to move the cursor right and left.
4
When the date is correct, press [OK]. The time setting screen (hour:minute:second)
is appears.
is appears.
5
To set the time, for each field press U or V as many times as necessary to display
the correct value then press Z to move to the next field.
the correct value then press Z to move to the next field.
6
Press [OK]. The date and time is set and the Date Setting menu reappears.
Setting Network Interface Parameters
This machine supports TCP/IP and TCP/IP (IPv6) protocols. IP is an abbreviation for
Internet Protocol. This machine routinely uses the TCP/IP (IPv4) protocol, but
provides a separate setting for the next generation IP, IPv6. Configure the printer's
network parameters as appropriate for your PC and your network environment.
Internet Protocol. This machine routinely uses the TCP/IP (IPv4) protocol, but
provides a separate setting for the next generation IP, IPv6. Configure the printer's
network parameters as appropriate for your PC and your network environment.