KYOCERA fs-1128 설치 설명서
Accessing COMMAND CENTER
20
SETUP GUIDE
3
Click Submit.
Enabling FTP Function
The FTP transmission function converts the data of originals scanned on this
machine to the PDF, TIFF, JPEG, or XPS format and uploads it directly to an FTP
server. Enable FTP parameters in COMMAND CENTER.
machine to the PDF, TIFF, JPEG, or XPS format and uploads it directly to an FTP
server. Enable FTP parameters in COMMAND CENTER.
In order to access a FTP server, you must consult the server administrator to check
the following information on each server and register them to this machine.
the following information on each server and register them to this machine.
•
Login user name (using operation panel)
•
Password (using operation panel)
•
Host name or IP address of FTP server
•
Port number (normally 21)
•
Path (path from the home directory of the FTP server to the folder for storage)
•
Shares the FTP server
Login username and Login password are identical to the FTP User login. The FTP
user account for the machine needs to be installed and administrated at the FTP
server.
user account for the machine needs to be installed and administrated at the FTP
server.
1
Click Scanner -> FTP.
2
Enter the correct settings in each field. The table below provides a summary of the
items displayed on the scanner FTP page.
items displayed on the scanner FTP page.
3
Click Submit.
Item
Description
FTP
Switches FTP On or Off.
FTP Port Number
Set the FTP Port Number or use the FTP default port 21.
FTP Encrypted TX
This enables or disables Encryption for communication. When turned On, data
communications are encrypted using the one of the following algorithms.
communications are encrypted using the one of the following algorithms.
Encryption
This allows you to specify the encryption algorithm for data communication. You can
use more than one algorithms at a time. (This is possible by turning FTP Encrypted
TX to On.)
use more than one algorithms at a time. (This is possible by turning FTP Encrypted
TX to On.)