KYOCERA fs-1128 설치 설명서
Preparations
SETUP GUIDE
9
Connecting Modular Cords (FS-1128MFP only)
1
Turn the power switch off (O).
2
Connect the modular cord with the attached
ferrite core to the line jack (A) of the
machine. Then, connect the modular cord to
the telephone jack (B) of the machine.
ferrite core to the line jack (A) of the
machine. Then, connect the modular cord to
the telephone jack (B) of the machine.
3
Route the cords as shown in the figure.
4
Turn the power switch on (|). The machine
begins to warm up. If the mache is first
installation, it will begin replenishing the
toner; this will take approximately 15
minutes.
begins to warm up. If the mache is first
installation, it will begin replenishing the
toner; this will take approximately 15
minutes.
Once the toner has been replenished,
Ready to copy will appear on the
message display.
Ready to copy will appear on the
message display.
A
B