Fujitsu IPC-4D CA02919-0521 사용자 설명서
제품 코드
CA02919-0521
The following show necessary parts and cycle that require cleaning.
M4099D
fi-4990C
fi-4860C
fi-4860C
fi-5750C
M4097D
fi-4750C
fi-4750L
fi-4530C
fi-4640S
fi-4340C
fi-4640S
fi-4340C
M3093GX/EX
fi-4120C
fi-4220C
fi-4220C
fi-4010CU
Pick Roller
Clean after scanning
100,000 sheets
Clean after scanning
10,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
1,000 sheets
Pad
Clean after scanning
100,000 sheets
Clean after scanning
10,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
1,000 sheets
Feeding
path
Clean after scanning
200,000 sheets
Clean after scanning
10,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
1,000 sheets
Document
bed
N/A
Clean after scanning
10,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
5,000 sheets
Clean after scanning
1,000 sheets
To keep your scanner operating properly, the scanner has to be cleaned periodically. Not cleaning the scanner may result in frequent miss feeds or shorter
replacement cycle of the pick roller, brake roller or pad.
Note 1) Cleaning cycle may be shortened depending upon the type of paper being scanned, especially when the scanned documents contain pencil marks.
Note 2) Non carbon paper contains chemicals which may damage the pad or rollers. Please pay attention to the following notes.
> Cleaning: In case of frequent miss picks when scanning non carbon papers, clean the pad, pick roller and brake roller.
> Replacement: The life of the pad, pick roller, brake roller and feed rollers may decrease if coarse papers are scanned.
For further information please refer to the relevant image scanner Operator/User manual or visit
Revision 3.5.7