LG 42LV375S 사용자 매뉴얼

y

y

Acquired certification SO : 
Sweden(Comhem, Canal Dig-
ital), Denmark(YouSee, Canal Dig-
ital, Stofa), Norway(Canal Digital), 
Netherlands(Ziggo, UPC Digitaal), 
Ukraine(Volia-Cable), Germany(KDG), 
Switzerland(CableCom, UPC), 
Austria(UPC Digital), Hungary(UPC Dig-
ital), Ireland(UPC Digital), Poland(UPC 
Digital), Romania(UPC Digital), 
Russia(OnLime).

y

y

If there are not any Service Operator 
that you want, select 

Other Operators.

y

y

If you select “

Other Operators”, or 

the selected country supports “

Operators” only, it may take some time 

to search all the channels, or it may not 
search some of the channels.

The following values are needed in order to search 

all available programmes quickly and correctly.

The commonly used values are provided as "de-

fault".

However, for correct settings, please inquire of the 

cable service provider.

When running 

Auto Tuning in DVB cable mode, 

selecting Full will search through all frequencies to 

find available channels.

In the case when the programme is not searched 

by selecting the Default, perform the searching by 

selecting the Full.

However, in the case when the programme is 

searched by selecting the Full, the Auto Tuning 

time can be taken too much. 

•

 Frequency : Enter a user-defined frequency.

• 

Symbol rate : Enter a user-defined symbol rate 

(Symbol rate: Speed at which a device such as 

modem sends symbols to a channel).

• 

Modulation : Enter a user-defined modulation. 

(Modulation: Loading of audio or video signals 

onto carrier).

•

 Network ID : Unique identifier allocated for 

each user.

• 

Start Frequency : Enter a user-defined start 

frequency range.

• 

End Frequency : Enter a user-defined end 

frequency range.

1

  Press 

Home to access the Home menu.

2

  Press the Navigation buttons to scroll to 

SETUP and press OK. 

3

  Press the Navigation buttons to scroll to 

SETUP and press OK.

4

  Press the Navigation buttons to scroll to 

Auto Tuning and press OK.

5

  Press the Navigation buttons to scroll to 

Satellite and press OK.

6

  Press the Navigation buttons to scroll make 

appropriate adjustments and press 

OK.

7

  Select 

Start to start automatic tuning.

The TV scans and saves available pro-

grammes automatically.

8

  When you are finished, press 

EXIT.

When you return to the previous menu, press 

BACK.

y

y

Programme Type : You can select All 

Programmes, FTA Programme or Paid 

Programme.

y

y

Network Search : You can search through 

both an existing 

Transponder List and the 

Transponder List that was transmitted via 

NIT.

y

y

You can change the 

Setting ID Info from the 

Setting menu.

y

y

You can 

Add/Delete the Setting ID from the 

SETUP -> Satellite DTV Setting menu.

y

y

If more than 6000 programmes are stored, 
you cannot store any more programmes. To 
add programmes, delete the unused setting 
IDs in 

SETUP -> Satellite DTV Setting and 

tune the TV again.

(Only satellite models)