LG lcv800 사용자 매뉴얼

다운로드
페이지 40
14
How to use 
Cleaning air filter and motor safety filter
If suction power is decreased after cleaning dust tank or indicator 
light is on, clean air filter and motor safety filter. 
Air filter and motor safety filter are located at the up of vacuum 
cleaner in the above figure.
•  Push the vacuum cover button, open the body cover.
• Hold dust separator handle and pull it upward.
•  Open the guide cover by pulling the guide cover lever and remove 
the dust.
• Open prefilter cover.
• Pull out the air filter.
• Clean air filter and motor safety filter with running water.
• Do not wash filters with hot water.
• Eliminate water thoroughly
• Dry it under well-ventilated shade for a day.
•  The air filter and the motor safety filter should be cleaned as above 
the figure.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics Service Agent.
Wash filters at least every 3 months.
Motor safety filter
Pre-filter cover
Guide cover
Dust separator
Air filter
Indicator on hose is flickering for 1 minute, it sounds “Ddilililing ~ Dding~ ddilililing~” like a buzzer from vacuum 
body. In 30 seconds, suction power will decrease, it stops operating automatically.
Indicator