LG ST600 사용자 가이드

17

C

onnecting

If there is a DHCP server on the local area 
network (LAN) via wired connection, this unit will 
automatically be allocated an IP address. After 
making the physical connection, a small number 
of home networks may require the unit’s network 
setting to be adjusted. Adjust the [NETWORK] 
setting as follow.

Before setting the wired network, you need to 
connect the broadband internet to your home 
network.
1.  Select [Connection Setting] option in the 

[Setup] menu then press Center button. 

2.  The [Connection Setting] menu appear on the 

screen. Use W/S to select the [Wired] and 

press Center button.

3.  Use W/S/A/D to select the IP mode 

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP 
address automatically.

If there is no DHCP server on the network and 
you want to set the IP address manually, select 
[Static] then set [IP Address], [Subnet Mask], 
[Gateway] and [DNS Server] using W/S/A/

D.

 

,

4.  Select [OK] and press Center button to apply 

network settings.

5.  The unit will ask you to test the network 

connection. Select [OK] and press Center 

button to complete the network connection.

6.  If you select [Test] and press Center button at 

step 5 above, the network connection status is 
displayed on the screen. 
You can also test it on the [Connection Status] 
in the [Setup] menu.