LG ST600 사용자 가이드

24

S

ys

tem  Se

tting

Set the unit’s Audio options according to the type 
of audio system you use. 

Since many factors affect the type of audio 
output, see “Audio Output Specifications” on 
page 50 for details.

 

,

[PCM Stereo]
Select if you connect this unit’s HDMI OUT or 
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder. 

[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or 
DIGITAL AUDIO OUT jack to a device with DTS 
decoder. 

[Primary Pass-Thru]
Select if you connect this unit’s OPTICAL AUDIO 
OUT and HDMI OUT jack to a device with 
LPCM, Dolby Digital, Dolby Digital Plus and DTS  
decoder.

[192 kHz]
Select this if your A/V Receiver or Amplifier is 
capable of handling 192 kHz signals.

[96 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz signals. When 
this choice is made, this unit automatically 
converts any 192 kHz signals to 96 kHz so your 
system can decode them. 

[48 kHz]
Select this if your A/V Receiver or Amplifier is 
not capable of handling 192 kHz and 96 kHz 
signal. When this choice is made, this unit 
automatically converts any 192 kHz and 96 kHz 
signals to 48 kHz so your system can decode 
them. 

Check the documentation for your A/V Receiver or 
Amplifier to verify its capabilities.

This function allows you to listen to a movie at a 
lower volume without losing clarity of sound.

[Off]
Turns off this function.

[On]
Compress the dynamic range of the Dolby 
Digital or Dolby Digital Plus audio output.

[Auto]
The dynamic range of the Dolby Digital and 
Dolby Digital Plus are operated as same as the 
[On] mode.

The DRC setting can be changed only the unit 
is in complete stop mode.

 

,