LG UB1HVAS01P 사용자 매뉴얼

 

7

 

 

 

 

3. Select to remove hardware. 

4. When your computer indicates it is acceptable to remove hardware, then unplug the USB Drive 

from the USB port. 

 

 

 

 

★

 

The USB Drive may be partitioned into three types of disk. We will use the following terms in this 

guide: 

1. Public Area 

There is no “Security” function at all. You can do any basic functions, 

described in the “Basic Functions” section, in this area. 

2. Security Area 

This area cannot be viewed without the application software. Once you do 

the “Log In” action in the application software, you will switch view from 

“Public Area” to “Security Area”. After successful switch, you can do any 

basic functions, described in the “Basic Functions” section, in this area.   

☞ You can only view either “Public Area” or “Security Area” at the same time 

in the same disk logic unit number(LUN).   

In USB Drive, you can select the following partition combinations: 

 

1. Single Public Area: Make all the device area accessible by everybody. 

2. Security Area: 

Make the device area into two partitions in the same LUN, Public Area and Security Area. 

Everybody can access the Public Area. The Security Area can be accessed “Only” with a 

password. 

3. Public Area Plus Security Area: 

Make the device area into three partitions in two LUNs, Public Area and Security Area in LUN0 

and Public Area in LUN1.   

 

 

Partition Type 

Caution: 

Never remove or unplug 

while the Red Status LED is flashing. Doing this may 

cause corruption of the data being transferred.