Viewsonic PLED-W600 사용자 설명서

다운로드
페이지 49
33
Using the Main Menu
Refer to the below table for details on menu items.
 
 
Some of the menu options are not available on PLED-W600 projector.
Menu
Menu option
Description
DISPLAY
Aspect Ratio
Select the aspect ratio of the display.
Available options: AUTO / 4:3 / 16:9 / 16:10
Overscan
Enable overscan display (only for HDMI input signal).
Available options: No / Yes
Digital Zoom
Digitally enlarge the projected image.
Available range: 0 ~ 10
Auto Image 
Adjust
Synchronize the display automatically (only for COMPUTER input 
signal).
Available options: No / Yes
Manual Image 
Adjust
Adjust the PC display settings.
Phase
Adjust to reduce horizontal noise.
Available range: 0 ~ 31
Clock
Adjust to reduce vertical noise.
Available range: -5 ~ 5
H. Position
Move the screen position horizontally.
Available range: -10 ~ 10
V. Position
Move the screen position vertically.
Available range: -10 ~ 10
Exit
Return to the DISPLAY submenu.
Color 
Temperature
Select the preset color temperature.
Available options: Warm / Normal / Cool
Brilliant Color
Increase the brightness by changing the colors.
Available range: 0~9
PICTURE
Color Mode Select a preset color mode.
Available options: Brightest / PC / Movie / Dynamic / sRGB
Brightness
Adjust the brightness of the image.
Available range 0 ~ 100 
Contrast
Adjust the contrast of the image.
Available range: 0 ~ 100 
Sharpness
Adjust the sharpness or softness of the image.
Available range: 0 ~ 31 
Saturation
Adjust the color intensity (only for Video input signal).
Available range: 0 ~ 100 
Tint
Adjust the balance of the red, green, and blue colors of the image (only 
for Video input signal).
Available range: 0 ~ 100 
Advanced
Set advanced settings for projected image.
Gamma
Adjust the color gamma differences between the dark 
and bright portions of the input signal.
Available range: 0 ~ 7
Color Space
Adjust the color for projected image from a video input 
signal.
Available options: AUTO / RGB / YUV
Pattern
Select the pattern type to be displayed on the screen 
when there is no input signal.
Available options: Off / 1 / 2 / 3 / 4 / 5
Exit
Return to the PICTURE submenu.