Viewsonic PJD6350 사용자 설명서

10

To switch the code for the remote control, press ID set and 

the number button corresponding to the remote control code 

set in the projector OSD together for 5 seconds or more. 

The initial code is set to 1. When the code is switched to 8, 

the remote control can control every projector.

The capability of operating your computer with the remote control gives you more 

flexibility when delivering presentations. 

1.

Connect the projector to your PC or notebook with a USB cable prior to using the 
remote control in place of your computer’s mouse. See 

 for details.

2.

Set the input signal to D-Sub / Comp. 1 or D-Sub / Comp. 2.

3.

Press Mouse on the remote control to switch from the normal mode to the mouse 
mode. An icon appears on the screen to indicate the activation of the mouse mode.

4.

Perform the desired mouse controls on your remote control.

•

To move the cursor on the screen, press 

/

/

/ . 

•

To left-click, press  . 

•

To right-click, press  . 

•

To operate your display software program (on a connected PC) which responds to 
page up/down commands (like Microsoft PowerPoint), press PgUp/PgDn.

•

To return to the normal mode, press Mouse again or other keys except for the 
mouse related multi-function keys.

The Infra-Red (IR) remote control is located on the front 

of the projector. The remote control must be held at an 

angle within 30 degrees perpendicular to the projector's 

IR remote control sensor to function correctly. The 

distance between the remote control and the sensor should 

not exceed 8 meters (~ 26 feet).

Make sure that there are no obstacles between the remote 

control and the IR sensor on the projector that might 

obstruct the infra-red beam.

Approx

. 30°