Viewsonic PJD5153 사용자 설명서

9

The projector can be assigned to 8 different remote control codes, 1 to 8. When several 

adjacent projectors are in operation at the same time, switching the remote control codes 

can prevent interference from other remote controls. Set the remote control code for the 

projector first before changing that for the remote control.

To switch the code for the projector, select from among 1 to 8 in the SYSTEM SETTING: 

ADVANCED > Remote Control Code menu.

To switch the code for the remote control, press ID set and the 

number button corresponding to the remote control code set in 

the projector OSD together for 5 seconds or more. The initial 

code is set to 1. When the code is switched to 8, the remote 

control can control every projector.

Switches between the normal and mouse 
modes.

PgUp, PgDn,  ,  : active after pressing 
Mouse. An icon appears on the screen to 
indicate the activation of the mouse mode.

Activates panel key lock.

Displays the presentation timer settings 
menu.

Increases the volume level.

Selects a lamp mode.

Allows user to define a short cut key on the 
remote control, and the function item is 
selected in OSD menu.

Displays the source selection bar.

Displays the 3D settings menu.

Goes back to previous OSD menu, exits 
and saves menu settings.

Operates your display software program 
(on a connected PC) which responds to 
page up/down commands (like Microsoft 
PowerPoint) when the mouse mode is 
activated.

Displays embedded test pattern.

Hides the screen picture.

Displays the HELP menu.

Toggles the projector audio between on 
and off.

Displays the zoom bar that magnifies or 
reduces the projected picture size.

Selects an available picture setup mode.

Decreases the volume level.