Viewsonic PJD7720HD 사용자 설명서

다운로드
페이지 95
47
Adjusting the Audio In 2 setting (for selected models)
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings
 > Audio In 2 menu. 
2.
Press 
/  to decide the audio input source for the AUDIO IN 2/MIC port. This 
will affect the connection method for different devices, and where the sound is from.
When Audio is selected:
The selected input signal determines which sound will be played by the projector speaker, and 
which sound will be output from the projector when AUDIO OUT is connected. For instance, if 
you select a D-Sub / Comp. 1 source, the projector can play the sound received from AUDIO IN 
1.
When Microphone is selected:
Adjusting the microphone sound level
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings
 > Microphone Volume menu.
2.
Press 
 to select a desired sound level.
This function is only available when the SYSTEM SETTING: ADVANCED > Audio Settings > 
Audio In 2 menu is set to Microphone.
Turning off the Power On/Off Ring Tone
1.
Open the OSD menu and go to the SYSTEM SETTING: ADVANCED > Audio 
Settings
 > Power On/Off Ring Tone menu.
2.
Press 
 to select Off.
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound 
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Device
 COMPUTER IN 1
COMPUTER IN 2
Video/S-Video
Audio input port
AUDIO IN 1
AUDIO IN 2
AUDIO IN 2
The projector can play 
the sound from...
AUDIO IN 1
AUDIO IN 2
AUDIO IN 2
Audio output port
AUDIO OUT
AUDIO OUT
AUDIO OUT
Device
COMPUTER IN 1
COMPUTER IN 2
Video/S-Video
Audio input port
AUDIO IN 1
AUDIO IN 1
AUDIO IN 1
The projector can play 
the sound from...
AUDIO IN 1
MIC
AUDIO IN 1
MIC
AUDIO IN 1
MIC
Audio output port
AUDIO OUT
AUDIO OUT
AUDIO OUT