Sony RDR-GX310 매뉴얼

To prevent fire or shock hazard, do not 
expose the unit to rain or moisture.
To avoid electrical shock, do not open 
the cabinet. Refer servicing to qualified 
personnel only.
The AC power cord must be changed 
only at a qualified service shop.

The use of optical instruments with this 
product will increase eye hazard. As 
the laser beam used in this DVD 
recorder is harmful to eyes, do not 
attempt to disassemble the cabinet.
Refer servicing to qualified personnel 
only.

This label is located on the laser 
protective housing inside the 
enclosure.

You are cautioned that any change or 
modifications not expressly approved 
in this manual could void your 
authority to operate this equipment.

G-CODE is a registered trademark of 
Gemstar Development Corporation. 
The G-CODE system is manufactured 
under license from Gemstar 
Development Corporation.

This equipment has been tested and 
found to comply with the limits set 
out in the EMC Directive using a 
connection cable shorter than 
3 meters.

Should any solid object or liquid fall 
into the cabinet, unplug the recorder 
and have it checked by qualified 
personnel before operating it any 
further.

• The recorder is not disconnected 

from the AC power source as long 
as it is connected to the wall outlet, 
even if the recorder itself has been 
turned off.

• If you are not going to use the 

recorder for a long time, be sure to 
disconnect the recorder from the 
wall outlet. To disconnect the AC 
power cord, grasp the plug itself; 
never pull the cord.