Sony RDR-GX310 매뉴얼

Select “OK,” and press ENTER.

The date, start and stop times, channel,
recording mode, etc. setting appear.

• If you want to change the setting, press

, to select the item and press M/m to
change the setting.

To re-enter the G-Code number, select
“Change.”

Select “OK,” and press ENTER.

The TIMER REC indicator lights up on the
front panel, and the recorder is ready to start
recording.

To stop recording during timer recording

Open the remote’s cover and press

REC STOP.

Note that it may take a few seconds for the
recorder to stop recording.

If the timer settings overlap

See page 42.

To extend the recording duration time while
recording

See page 42.

To confirm, change, or cancel timer recording

See “Checking/Changing/Canceling Timer
Settings (Timer List)” on page 46.

z Hint
The Rec Mode Adjust function also works with this timer
method (page 42).

You can set the recorder to record in 30 minute
increments.

Press

z REC repeatedly to set the duration.

Each press advances the time in 30 minute
increments. The maximum duration is six hours.

The time counter decreases minute by minute to
0:00, then the recorder stops recording (power
does not turn off). Even if you turn off the recorder
during recording, the recorder continues to record
until the time counter runs out.

To cancel the Quick Timer

Press

REC repeatedly until the counter appears

in the front panel display. The recorder returns to
normal recording mode.

You can adjust the recording picture quality and
picture size.

Timer - G-Code

Is the following timer setting correct? To modify,

Cancel

Change

Mode

Date

9/28

107

adjust each item or re-enter the G-Code.

Wed

Start

10 00

Stop

Using the Quick Timer function

Adjusting the recording picture
quality and size

0:30

1:00

5:30

6:00

(normal recording)

</M/m/,,
ENTER

TOOLS