Sony RDR-GX310 매뉴얼

다운로드
페이지 104
91
A
d
d
iti
o
n
a
l In
fo
rma
ti
o
n
On cleaning discs
Do not use a commercially available cleaning 
disc. It may cause a malfunction.
Notes about the discs
• To keep the disc clean, handle the disc by its 
edge. Do not touch the surface. Dust, 
fingerprints, or scratches on the disc may cause 
it to malfunction.
• Do not expose the disc to direct sunlight or heat 
sources such as hot air ducts, or leave it in a car 
parked in direct sunlight as the temperature may 
rise considerably inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe the 
disc from the center out.
• Do not use solvents such as benzine, thinner, 
commercially available cleaners, or anti-static 
spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g., 
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker 
adhesive on it.
Specifications
System
Laser: Semiconductor laser
Channel coverage: 
NTSC
VHF: 2 to 13/UHF: 14 to 69/CATV: A-8 to 
A-1, A to W, W+1 to W+84
Video reception: Frequency synthesizer system
Audio reception: Split carrier system
Antenna: 75-ohm antenna terminal for VHF/
UHF
Timer: Clock: Quartz locked/Timer indication: 
12-hour cycle (digital)/Power back-up 
duration: 1 hour 
Video recording format: MPEG Video
Audio recording format/applicable bit 
rate: Dolby Digital 2 ch/256 kbps
Inputs and outputs
LINE OUT
(AUDIO): 
Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, 
C: 0.286 Vp-p
LINE IN 1/2/3
(AUDIO):
 Phono jack/2 Vrms/more than 
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, 
C: 0.286 Vp-p
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (OPTICAL): Optical output jack/
–18 dBm (wave length: 660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, P
B
/C
B
,
P
R
/C
R
):
Phono jack/Y: 1.0 Vp-p/P
B
, P
R
:
interlace*=0.648 Vp-p, progressive or 
interlace**=0.7 Vp-p
*
“Y/Pb/Pr Out Black Level” is “On”
** “Y/Pb/Pr Out Black Level” is “Off”
,continued