Sony SPP-SS966 매뉴얼
20
US
Telephone Features
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Do not allow more than 20 seconds to elapse between each step of the
procedure.
Tips
• If you have entered a wrong number in step 3 and have not pressed
• If you have entered a wrong number in step 3 and have not pressed
(VOL/PGM) (step 4) yet, just turn Jog Dial down to erase it. Then, enter the
correct number.
correct number.
• You may press Jog Dial instead of (VOL/PGM) in step 4.
To store a number to be dialed via Private Branch Exchange
(PBX)
(PBX)
Before entering a phone number in step 3 on page 19, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (REDIAL/PAUSE).
To change a stored number
1
Press (VOL/PGM).
2
Press one of the ONE-TOUCH DIAL buttons ( (A) to (C)).
The current number appears on the display.
3
Turn Jog Dial down to erase the current number.
4
Enter a new number.
5
Press (VOL/PGM).
Note
You can replace the stored number with a new number, but you can’t just erase it.
You can replace the stored number with a new number, but you can’t just erase it.
Making calls with one-touch dialing
1
Press (TALK/ CALL WAITING/ FLASH) and wait until “TALK”
appears on the display.
appears on the display.
2
Press one of the ONE-TOUCH DIAL buttons ( (A) to (C)).
The phone number stored on the one-touch dialing button
will appear on the display and will be dialed.
will appear on the display and will be dialed.
To check the phone number before one-touch dialing
When not conversing with an outside caller with the handset, press
one of the ONE-TOUCH DIAL buttons ( (A) to (C)).
one of the ONE-TOUCH DIAL buttons ( (A) to (C)).
The number stored for that button appears on the display for five
seconds. To dial the number, press (TALK/ CALL WAITING/ FLASH) while
the number is displayed.
seconds. To dial the number, press (TALK/ CALL WAITING/ FLASH) while
the number is displayed.
One-touch dialing (continued)