Omnitron miConverter 10/100 1101-2-1 사용자 설명서
제품 코드
1101-2-1
miConverter
miConverter
TM
Miniature 10/100BASE-TX to 100BASE-FX Ethernet
media converter
Supports 10BASE-T, 100BASE-TX, 100BASE-FX and
the IEEE 802.3 specification
Supports Full/Half-Duplex UTP auto-negotiation
Automatically detects and adjusts crossover function
Multimode, single-mode and single-fiber options
ST or SC fiber connector options
Domestic, Universal and Country/Region specific AC
power supply options available
Optional USB power adapter cable available for
operation without AC power adapter
The miConverter 10/100 Plus features DIP-switches for
UTP and Link Mode configurations
LED indicators for UTP and fiber status
Wall-mount with optional mounting brackets or in an
18-Module Powered Chassis
Cost-effective
Small and light, weighs only 5 ounces
Lifetime Warranty and free 24/7 Technical Support
miConverter
10/100 and
miConverter
10/100 Plus
10/100TX to 100FX Ethernet Media Converters
The miniature miConverter 10/100 and miConverter 10/100
Plus are rate-switching 10/100 UTP copper to 100BASE-FX
fiber media converters. The miConverter provides cost-
effective fiber connectivity from Ethernet switches to diagnostic
equipment, desktop and laptop computers.
They can be powered by a computer’s USB port using
They can be powered by a computer’s USB port using
the optional USB Power Adaptor Cable, which reduces
the module’s weight and eliminates the need to tether the
miConverter to an electrical outlet that provide cost-effective
fiber network extension and connectivity.
The UTP port can auto-negotiate by detecting the speed and
The UTP port can auto-negotiate by detecting the speed and
duplex-mode of the connected device. Upon connection to the
UTP device, the UTP port speed adjusts to either 10Mbps or
100Mbps, and the duplex-mode adjusts to either Full-Duplex
or Half-Duplex. Auto-crossover enables the connection to
workstations (MDI port) or hub/switches (MDI-X port) without
requiring a crossover cable.
The 100BASE-FX fiber port operates in Full-Duplex mode.
The 100BASE-FX fiber port operates in Full-Duplex mode.
Models are available for single-mode or multimode fiber
with ST or SC fiber connectors. Multimode fiber models
support distances up to 5km and single-mode fiber models
support distances up to 120km. Single-fiber models feature
Bi-Directional fiber and support distances up to 40km.
The miConverter 10/100 Plus features DIP-switches for the
The miConverter 10/100 Plus features DIP-switches for the
configuration of the UTP port and four different Link Modes
(fault-detection capabilities). The DIP-switches allow manual
configuration of the UTP speed and duplex mode while the Link
Modes assist in the identification and isolation of link failures.
The available modes are Link Segment, Link Propagate,
Remote Fault Detection and Symmetrical Fault Detection.
Diagnostic data is provided through LED indicators that assist
Diagnostic data is provided through LED indicators that assist
in network installation and maintenance. The LEDs report the
availability of power, port activity and link status, speed and
duplex modes of the UTP port.
The external AC power supply is available in US, Universal
The external AC power supply is available in US, Universal
and Country/Region specific models. Country/Region specific
models feature optional interchangeable connectors, allowing
for compatibility with electrical outlet types found around the
world.
The miConverter
The miConverter
10/100 and miConverter 10/100 Plus can
be mounted in the miConverter 18-Module Power Chassis
to consolidate individual modules into a rack-mount form
factor that can be deployed where multiple fiber optic links
are distributed from UTP switch equipment. The chassis
powers converter modules with barrel-style DC connectors,
and is available with a single universal AC, 24VDC or 48VDC
internal power supply. This compact, high-density chassis is
1.5 rack units high, and can be mounted in a standard 19” or
23” equipment rack.
Key Features
Shown with optional wall-mounting bracket kit